Ultralight Quad Build - FlightClub PROton

Learn how to build an ultralight quadcopter in this comprehensive video tutorial. Follow along as the instructor guides you through the entire build process of the FlightClub PROton ultralight quad, ideal for beginner to intermediate pilots. Discover the step-by-step assembly, from mounting components and soldering connections to configuring BetaFlight and testing the finished build. Gain insights on component selection, frame assembly, motor installation, and proper wiring techniques. Master essential skills in flight controller setup, including flashing firmware, adjusting PIDs, and configuring modes. Explore advanced topics such as BLHeli configuration, OSD setup, and CLI commands. Complete the build by mounting the VTX, camera, and GoPro, then learn how to conduct pre-flight tests and achieve optimal performance. By the end of this tutorial, you'll have the knowledge to construct a lightweight, moderately powerful quadcopter capable of 5-minute flight times with a 1300mAh 4S battery.

I made a boo boo. At I soldered the Smart Audio to RX6 instead of TX6. It needs to go to TX6. Follow the schematic on the website. That's what happens when I film with a camera in my face.
Build list -
Parts used -
Mount RX -
Put frame together -
Mount Arms -
Cut motor wires and mount -
Install wires for vtx and cam -
**Put white smart audio at TX6, not RX6 like I did, oops -
Add LED -
Test power up -
Bind the RX -
BetaFlight Flash Flight controller -
Motors tab -
BLHeli Configurator -
Star Wars!
Betaflight Configuration -
Ports -
PIDs -
Receiver -
Modes -
OSD -
CLI commands -
Mount VTX and camera -
GoPro mount -
How to use BetaFlightOSD -
Test before flight -
Finished weight -
EnvyAstro Test flight -